KX-T (v3 or Above) System Speed Dial Name Set

This programming will assign names to the system speed dial numbers entered into the system. Only the large display telephones (KX-T7235, KX-T7431, KX-T7433 & KX-T7436) will show the stored names when performing system speed dial. 

  • Names entered can be no more than 10 characters
  • Speed dial numbers 000 through 499

To enter the Program Mode:

1) Press PROGRAM button

2) Press * * then 1 2 3 4

3) Enter 002
The display will show: Sys Spd Name

4) Press SP-PHONE button
The display will show: SPD Code? ---->

5) Enter a speed dial number
Enter speed dial number 000 or you can press SP-PHONE button.
Display will show: 000: Not Stored

6) Enter a name For entering characters, see attached Section 4.1.3 "Entering Characters"
To delete the current entry, press TRANSFER button
To change the current entry, press TRANSFER button and enter the new name

7) Press STORE

8) To program another speed dial number, press SP-PHONE button and the desired speed dial number

9) Repeat steps 6 through 8

10) Press HOLD button

11) Lift the handset to exit the programming mode

To make a call using the System Speed Dial:

1) Press speakerphone or pick-up handset
2) Press Auto Dial Store button 
3) Enter the Speed Dial 3-digit code (000-499)