Support

KX-T (v3 or Above) System Speed Dial w/ 7431 Phone

This programming will assign names to the system speed dial numbers entered into the system. Only the large display telephones (KX-T7235, KX-T7431, KX-T7433 & KX-T7436) will show the stored names when performing system speed dial. 

  • Names entered can be no more than 10 characters
  • Speed dial numbers 000 through 499
  • Names must be entered from the programming phone (usually ext. 101)

To enter the Program Mode:

1) Press PROGRAM button

2) Press * * then 1 2 3 4

3) Enter 002 The display will show: Sys Spd Name

4) Press NEXT
The display will show: SPD Code? >

5) Enter a speed dial number
To enter speed dial number 000, you can also press NEXT.
Display will show: 000: Not Stored

6) Enter a name
For entering characters, see attached Section 4.1.3 "Entering Characters"
To delete the current entry, press CLEAR
To change the current entry, press CLEAR and enter the new name

7) Press STORE

8) To program another speed dial number, press NEXT or PREV, or SELECT and the desired speed dial number

9) Repeat steps 6 through 8

10) Press END

11) Press PROGRAM button to exit the programming mode

To make a call using the System Speed Dial:

1) Press speakerphone or pick-up handset
2) Press Auto Dial Store button 
3) Enter the Speed Dial 3-digit code (000-499)


*