Support

Changing Names In Display

Selection: Jack number KX-TD816 01 through 16 (-1 / -2)
KX-TD1232 01 through 64 (-1 / -2)
(-1 = first part, -2 = second part)
Name: 10 characters maximum
To find the current jack number for each phone, go to the programming phone and press Program button, then 0 0 3. This will list the extension numbers with the correct jack numbers. On display phones, if you press Program button, then 9 9 then 6, this will show the jack number for that particular display phone.

To enter the program mode,

1. Press Program Button, then press * * 1 2 3 4.

2. Enter 004, display will show: EXT Name Set

3. Press Next, display will show: Display: Jack No? >

4. Enter a Jack Number, to enter jack number 01, you can also press NEXT. To select the second part (-2), press NEXT after entering a jack number. Display will show: #01-1: Not Stored

5. Enter a Name, for entering characters, see Section 4.1.3 "Entering Characters." To delete the current entry, press CLEAR. To change the current entry, press CLEAR and enter the new name.

6. Press Auto Dial Store Button.

7. To program another jack, press NEXT or PREV, or SELECT and the desired jack number.

8. Repeat steps 5 through 7.

9. Press END.

10. When finished, press Program button or lift handset to exit Programming Mode.


*